Vials, Autosampler Vials: Short Description: Snap/Crimp Top Vial 11mm, Amber PP, 0.3ml Fused Insert • Dimensions: 12 x 32mm • Total Volume: 0.4ml • Usable Volume: 0.25ml • Min working volume: 30µL • Residual volume: 4µL • Neck Diameter: 11mm • Features: Micro-Vial: Subcategory1: HPLC & GC Autosampler Vials: Material
This vial/closure system is recommended for HPLC applications only; Universally usable vials for almost all autosamplers, even for those with robotic handling; Micro-inserts can be delivered pre-assembled in vials; Vials can also be crimped with a standard 11 mm aluminium crimp seal, as the two snap-ring lips have the same height as a crimp neck
With over 30 years of experience, CPI International is a well-respected supplier of certified reference material, laboratory consumables, small equipment, and test kits to scientific professionals working in spectroscopy, chromatography, mass spectrometry, and microbiology.
Home » Products » 1-4mL Autosampler Vials for HPLC, UPLC, GC » Micro-Inserts Micro-Inserts Application: Suitable for 8-425, 9mm, 10-425, 11mm snap vials
KIMBLE® Amber Sample Vial, 20 mL, 24-400 WHEATON® Tubular Serum Vial, 60mL DURAN® Reagent Bottle Wide Neck Clear, Neck with standard ground joint and glass flat-headed stopper
Interlock limited volume vials offer the performance and convenience of a one-piece microvial for a fraction of the cost. A 300 µL insert is fused into a 12 x 32 mm clear or amber glass vial.
Zhejiang Aijiren is a manufacturer of Laboratory consumables. We supply autosampler vials, septa and caps at factory price. 1. 1.5mL 11mm Snap Ring Vial ND11 can be used for GC and HPLC. 2.
Contact us . 1.5 ML/2ML 8-425 Screw Neck Autosampler Vials ND8 . Material: USP Type 1, Class A, 33 Borosilicate Glass 1.5mL 11mm Snap Ring Autosampler Vial ND11 ...
1.5mL 11mm Crimp Ring Vial ND11 1.5mL 11mm Snap Ring Vial ND11 1.5ml 10-425 Screw Vials ND10 1.5 ML/2ML 8-425 Screw Neck Vials ND8 1.5ml 9mm Short Thread Vials ND9 Cases
inserts I-D vials feature write-on patch with graduations at 0.5, 1.0 and 1.5mL Target ColorBand™ crimp top vials feature color-coded graduated write-on patch Vials with an 11mm crimp finish require aluminum seal closures Crimp/snap vials can be used with either 11mm aluminum seals or
Autosampler Vials 2ml HPLC Vials 9-425 Amber Vials Lab Vials with Write-on Spot and Graduations,9mm Blue ABS Screw Sealed Cap with Red PTFE B08813RM4P $72.00 $39.24 Features: The amber sample vials are made of grade 1 A-type 5.0 neutral borosilicate glass with a writable label attached to the bottle for sample identification.
Kinesis TPX Snap Ring Vial 32 x 11.6mm with Integrated 0.2mL Glass Micro-Insert 15mm Top Silanised Code: CHR2704 D2-138 The comprehensive range of vials includes micro and fused-inserts, standard 2ml autosampler and larger sample storage, headspace and EPA vials.
Available in a variety of colors for easy sample identification. 11mm Snap Top Caps™ with Metal O-Rings (5) Our snap caps are now available assembled with a septa and a round o-ring for use in any application where CTC Analytics PAL ® instruments must transport the vial to another location using the magnets found on the instruments.
Customer Service and Technical Support Let us Help You!. We are available Mon-Fri 7:30am-4:30pm PST via our online chat or to talk over the phone during our normal business hours, and we’re always ready to provide you with our best customer service!
In our range, you will find vials with the following closures: headspace edge (chamfered edge), DIN roll edge (flat edge), special roll edge for SPME vials (thicker roll edge), snap ring, melted edge (flat bottom glass), short thread ND9, fine thread ND18 for headspace and SPME, snap lid edge (sample storage vessel, no autosampler bottle).