Autosampler vials 03-377-299 Pack of 100 XBridge BEH C18 Prep Guard Cartridge, 130Å, 5 µm, 10 mm X 10 mm, waters ... Fisherbrand* Spinbar* Magnetic Micro ...

Analyze FDs at the frequency specified in Section 9.3.8. 11.2 SAMPLE PREPARATION: VIAL AUTOSAMPLER METHOD - Activate the cooling mechanism of the refrigerated autosampler and allow it to reach the temperature set point. Remove samples from cold storage and immediately load them into the vial autosampler.

A volume of 120 μL was transferred either into the wells of a 96-well plate (Waters, Hertfordshire, U.K.) for UPLC-MS or to the CE-MS sample vials (Aijiren Technologies UK, Ltd., Edinburgh, U.K.). A quality control (QC) sample pool was prepared by mixing 5 μL of each aqueous extract sample in a separate Eppendorf tube.

Vials. Autosampler Vials, Inserts, and Closures. Chromatography Autosampler Vial Caps Only (1,133) Chromatography Autosampler Vials Only (1,125) Chromatography Autosampler Vial and Closure Kits (1,107) Chromatography Autosampler Vial Septa Only (247) Chromatography Autosampler Vial Inserts (141) Chromatography Autosampler Vial Plugs (14)

DWK Life Sciences Kimble™ KIMAX™ Conical-Bottom Glass Centrifuge Tubes, 10mL. Use these tubes for centrifugation up to 2980 RCF. KIMAX™ Conical-Bottom Glass Centrifuge Tubes are plastic shrink-wrapped in modular trays for cleanliness and safety. Manufactured from 51 expansion, low extractable borosilicate glass.

For Tubes with Inner Diameter of 9.5 to 10.5 mm (1) For Types A - I Micro Tubes (1) For Urine Tubes (1) For VWR® SuperClear™ Microcentrifuge Tubes (1) For Vials with Straight Wall Glass Finish (1) For Vials with a 30 mm Outer Diamater (1) For Waters Autosamplers (1) For Wide Opening 9 mm Vials (1) For Wide Range of Samco Round based Tubes (2)

May 01, 2015 · The HPLC autosampler vials were capped using screw caps with septa and vigorously vortexed for a few seconds. The screw caps with septa were removed from the HPLC autosampler vials, and 50 μL 5 mM POPC/POPG (3:1) LUV solution was added to each of the limited volume inserts in the vials. The final volume of the solutions in the limited volume

All sample extracts were analyzed on a Waters 2695 high pressure liquid chromatograph (HPLC) interfaced with a Waters Quattro Micro triple quadrupole mass spectrometer (Snow et al., 2003; Govaerts et al., 2003). Analytes were separated on a reverse phase (HyPurity C18, 250 mm × 2.1 mm, 5 μm particle size) column at 50 °C with

Fisherbrand (115) Glass Vials (4) Globe Scientific Inc (21) KSE Scientific (15) Kemtech America Inc (9) LaMotte Company (1) Labconco Corporation (Research) (1) MilliporeSigma Supelco (3) National Scientific Supply Company, Inc (7)

Jul 01, 2009 · The autosampler must be set up to perform suitable mixing of the OPA solution with the sample for the derivatization reaction to occur. Collection of microdialysates into Waters glass, low-volume inserts, which are compatible with the Waters 717 autosampler carousels, reduces the risk of contamination and sample loss.

Oct 11, 2019 · For GC-MS analysis, Aijiren gas chromatograph (GC) and a 5973 quadrupole mass spectrometer (MS). Chromatographic separation was performed by 30 m, HP-5 5% phenyl–methyl siloxane column (Aijiren 19091J-433) with an I.D and thickness of 0.25 mm (Aijiren Technologies Inc., Santa Clara, CA, United States). Methods

5.3 Vials 5.3.1 Extract storage—10- to 15-mL, amber glass, with fluoropolymer-lined screw cap 5.3.2 GC autosampler—1- to 5-mL, amber glass, with fluoropolymer-lined screw- or crimp-cap, to fit GC autosampler 5.4 Balances 5.4.1 Analytical—capable of accurately weighing 0.1 mg 5.4.2 Top loading—capable of weighing 10 mg 5.5 Sample cleanup

250 microL flat bottom insert (Body) Borosilicate glass--1-1389-07: 1pack(500pc) 1: 4035-631ID: 40466142: 119.90 SGD

Micro-Inserts & Shell Vials & Racks &Crimper 100pcs/pack. IP150. 150ul Insert with mandrel interior and polymer feet, 29*5mm; suits for ND8 Vials. IP250. 250ul Insert with mandrel interior and polymer feet, 29*5.7mm; suits for ND9 Vials. I200. 200ul Micro-Insert,31*5mm,clear glass,flat bottom; suits for ND8 Vials.