Compared to many vials on the market, our freestanding vials do not have a true, deep conical bottom. Instead, the vials have a shallow V-shaped bottom, which allows samples to be spun at low speeds if necessary while providing a better ability for complete sample recovery.

10pcs 10ml micro centrifuge tube vial clear plastic vials container snap cap G/ AU $4.26. Free postage. Centrifuge Tube Conical Bottom 15ML,Pack Of 50. AU $28.27.

TUBE CULTURE POLYSTYRENE SNAP CAP 17X100. TUBE GAMMA 12X75MM (250/PK) TUBE MICROCENTRIFUGE 0.5ML. VACUUM PUMP OIL (1L) VHS VIDEO TAPE (120MIN) VIAL CONICAL 14/10 (3ML) VIAL CONICAL 14/10 (5ML) VIAL GLASS CONICAL SCREW CAP 5ML 12/PK. VIAL GLASS SNAP CAP 12ML.

J.G. Finneran 10-425 mm Screw Thread Closures Larger opening provides increased target area for needle penetration. Closures are ideal for autosamplers requiring closure to support or hang vial in tray (such as Hitachi, Jasco, Shimadzu

2. Clean and dry a 5-mL conical reaction vial with spin vane inside. Add a clean cap (with a septum), and record the mass of the vial and cap. You will also need a clean, dry Claisen adapter, water condenser and micro-syringe, with needle. 3. In the hood, add 2.0-mL of propanoyl chloride to the conical vial. Cap the vial then

YSH22 Vial Holder for conical -, centrifuge-, round bottom- and test tubes up to 40 mL volume Cubis® High Capacity Micro Balances Models: MS* 36S/P; 66S/P; 116P YSH23 Vial Holder for conical -, centrifuge-, round bottom- and test tubes up to 40 mL volume Cubis® II Semi-Micro and Analytical Balances

Flat Bottom, Suits for 10-425 Vials: 250uL Conical Micro-Insert, 31*5.7mm, Suits for 10-425 Vials: 250uL Micro-Insert with Mandrel Interior, & Polymer Feet, 29*5.7mm, Suits for 10-425 Vials: 250uL Conical Micro-Insert, 31*5.7mm, Suits for 10-425 Vials

10-425 Screw Thread Vial Clear No 12x32 Flat Bottom 1.8mL 1.5mL <170 82028-426 1000 Clear Yes 12x32 Flat Bottom 1.8mL 1.5mL <170 82028-428 1000 Amber Yes 12x32 Flat Bottom 1.8mL 1.5mL <170 82028-432 1000 300µL Spring Insert Clear – 6x31 Conical 375µL 0.25mL <1 46610-762 100 Polypropylene – 6x30 Conical 325µL 250µL <2 100

Product Description. SDS. 508896. volume 1 mL, clear glass vial, conical bottom, closure type, crimp top vial, pkg of 125 ea. Pricing. 27537. volume 0.7 mL, natural polypropylene vial, vial O.D. × H 8 mm × 40 mm, closure type, starburst conical snap plug (included), pkg of 100 ea.

These vials are made from Wheaton-33 low extractable borosilicate glass and they safeguard against any change of product pH caused by alkali, which can be extracted from ordinary glass. Wheaton V-Vials are exceptionally sturdy vials with a conical interior bottom.

JG Finneran 4050FB-917 Glass Flat Bottom Vial for 96-Well Micro Plate System, 0.5ml Capacity (Case of 100) $10.50 #33. Conical, Bottom Spring (Case of 100)

Vial Converter Ring, NonDEHP (1) With 0.22 µ Filter, Vented (1) 1 Inch L Tube, 0.123 ml, Clave Needleless Port, Gravity, Single Dose, NonDEHP (1) 10 to 50 mL (1) 20 mm, Blue, With Male Luer (1) 28 mm (1) 5 ml, Clave Port (1) 50 mL, 0.22 mic Vent and Clave (1) Allows Vial Access with Luer Tips of Syringe, NonDEHP (1) Universal (1) More

Description. Maximize your sample performance and have fewer failed assays with Thermo Scientific™ Chromacol™ GOLD-Grade Inert Glass Vials. These vials offer the most state-of-the-art technology in the industry for the analysis of critical low detection limit analytes, and when sample quality, reproducibility, security, and integrity are of upmost importance.

Screw Thread Micro-V Vials. Borosilicate glass 1.5 mL volume 12 x 32 mm Micro-V vials are compatible with standard screw closures. Vials have a total volume of 1.5 mL and less than 5 µL of dead volume. Vials are designed for center needle position during sample injection (not recommended for Vortex).

Questions about Multi-dose vials. 1. What is a multi-dose vial? A multi-dose vial is a vial of liquid medication intended for parenteral administration (injection or infusion) that contains more than one dose of medication. Multi-dose vials are labeled as such by the manufacturer and typically contain an antimicrobial preservative to help