Unless otherwise stated, all autosampler vials offered in this brochure (clear and amber Small opening requires micro-inserts with a diameter of 5mm.
Waters Autosampler Vials, Plates, and Seals for Use with Alliance HPLC Systems . Settings for Alliance HPLC Vials and Low Volume Inserts (LVI) .
Results 1 - 30 of 87 27418. volume 0.25 mL, clear glass vial,. step vial, large opening (with glass insert). , pkg of 100 ea. View Pricing · 27419. volume 0.25 mL ...
1.5ml/2ml Screw Neck ND8, small opening, 8-425 thread autosampler vial with 31*5mm; suits for 8-425 Vials, 150uL. Micro-Insert with Mandrel Interior
Volume: 150ul, 250ul, 300ul. Dimension: 5x29mm, 6x31mm. Material: Clear Glass Suit for: 1.5/2ml hplc vial. Bottom: flat, concial with/without polyspring.
➋51-Expansion glass. **Vial made of Polypropylene. ***Certified PLUS (Cert+) Level 2 Certification. Need help finding out if your autosampler is
29*5mm Polypropylene Autosampler Vial Inserts Suit for 10-425 6 ®VWR AUTOSAMPLER VIALS, INSERTS, AND CLOSURES | PLACE YOUR ORDER TODAY AT VWR.
We supply autosampler vials, Inserts, Crimper and Syringe Filters at factory 31*5mm; suits for 8-425 Vials, 150uL. Micro-Insert with. Mandrel Interior
31 x 5mm Micro-Inserts Limited volume inserts are an economical solution in sample analysis to reduce the use and waste of solvents and small samples.
Available in either Borosilicate glass (Type I available) or Polypropylene plastic, our vials come in a variety of sizes and amber or clear colors that are sure
China 150microliter Glass Micro-Inserts 8-425 Screw Neck Autosampler Vial suits for 8-425 Vials, 150uL glass Micro-Insert, 31*5mm; Conical Bottom; ...
Results 1 - 15 of 141 Autosampler vials and compatible inserts, septa, and closures designed for chromatography applications. Products come in various ...
Micro-Inserts for Crimp Neck Vials ND11 with wide opening La-Pha-Pack Autosampler Compatibility Chart ... 0.1ml Micro-Insert,. 31 x 5mm, clear glass,.
Autosampler Vials with fused-in 0.3 mL Insert . SGE Microvolume Syringe (Plunger-in-needle), 0.5 µL- 5 µL . ... 5 mm × H 31 mm, spring required.
