Insert for Vial 12x32mm 2ml 9-425 thread, wide opening. NATIONAL SCIENTIFIC. Material: Conical bottom glass with Polyspring x 100 u. 060843-629 NATIONAL SCIENTIFIC PARA LABORATORIO

Well-to-well spacing 9 mm. Alphanumeric well coding. High chemical resistance. High temperature resistance (-196 to +121°C) Sealable with adhesive films and heat sealer. Sealable with CapMats. Solid bottom. Well profile: V-Bottom/chimney well (conical bottom) Quantity per bag/case: 10/100.

JM Sheathing R-Values Will Not Change: JM’s wall sheathing line, AP Foil and CI Max, are not governed by LTTR test methods and have different R-value measurement standards.

XACT PRO 7548. Lightweight construction. More comfort when using harder set-ups. All adjustments made externally. No sealing surface so minimum drop of pressure after valves opens. Unlimited opening up of WP Cone Valve so harshness reduced. No shims, therefore no loss of damping because of bent shims. HQ coating.

Prevent the syringe from bottoming out and damaging the needle with Thermo Scientific™ National SepCap Polyspring Limited-Volume Inserts for Waters 96-Position Autosampler.

Need for inserts: • Flat or conical with polyspring • If you only have a small amount of sample, you may choose to place a limited volume insert inside the vial or choose micro sampling vials like Micro-V or High Recovery. • Polyspring at the bottom of the conical insert keeps it aligned for proper injection.

Bottom drain, open top 100 L SH30646.02 Bottom drain, open top 200 L SH30646.03 Bottom drain, open top 300 L SH30647.06 Single-use tank liner, nonirradiated Bottom drain, open top 50 L SH30399.01 Bottom drain, open top 100 L SH30399.02 Bottom drain, open top 200 L SH30399.03 BioProcess Container, irradiated Bottom drain, closed top 50 L SH30946.01

Insert the master EndoREZ gutta percha points cone to length. #25 accessory points are recommended. EndoREZ canal sealer will set in the canal in about 20–30 minutes. Sear off extraneous gutta percha and restore coronal aspect. EndoREZ canal sealer is conducive to lateral condensation or warm gutta percha techniques.

J.G. Finneran 401PBS-530, Polypropylene Conical Limited Volume Insert with Bottom Spring, Precision-Formed Interior, No Spring, 100µL Capacity, Pack of 100: Amazon.com: Industrial & Scientific

SPIROL’s Inserts for Plastics are offered in thread sizes ranging from 2-56 (M2) to 5/16-18 (M8) - depending on Insert type. In addition to being able to request a quote for SPIROL’s Threaded Inserts online, you are also able to view or download 2D drawings and 3D models of specific parts.

Buy Reserved for MWKINVICLO1 and more from our comprehensive selection of

Nalgene has a water bottle for every lifestyle and every adventure. Made in the USA, BPA free, durable and dishwasher safe.

Well diameter at bottom of conical section: 1.46 mm: Well volume: 50 µl: Well spacing: 4.50 mm: Well angle: 17.5° Well offset: Left edge to well A1: 12.13 mm: Top edge to well A1: 8.99 mm: Left edge to P24: 115.63 mm: Top edge to P24: 76.49 mm

Description: Polyspring inserts are self-aligning and provide a cushion against needle contact. ,66065-264PK,66011-200PK,66030-462CS,66030-462PK Inserts, MicroSolv

Inserts for 2 mL large opening vials, 6.0 mm I.D., volume 0.3 mL, glass insert (conical with polyspring), O.D. x H 6 mm x 30 mm, pkg of 100 ea Artikelnummer: Z291803-1PAK Mengeneinheit: 1X1PAK